2025 Bush Hog® Flex-Wing Rotary Cutter 1812
- Year 2025
- Make Bush Hog®
- Model Flex-Wing Rotary Cutter
2025 Bush Hog® Flex-Wing Rotary Cutter 1812
The 1812 Flex-Wing Rotary Cutter is designed for small tractors with a PTO horsepower of 50 to 75. The narrow cutting width of 12-feet makes this Flex-Wing ideal for rolling terrain where a wide rigid cutter will not perform as well. Grass, weeds, and brush up to 1 1/2-inch diameter are no match for the hardened parallel uplift blades. The narrow width is also ideal for orchards with prunings that must be cut into smaller pieces. The 1812 has maintenance friendly features, E-Z cleaning decks, high performance cutting and distribution, and it is built Bush Hog® tough for years of reliable service.
Features may include:
- E-Z clean smooth decks are on the center and wings.
- Wing “free float” without movement of wing hydraulic cylinder rod extends cylinder life.
- Gearbox oil sight gauge allows the checking of the oil level in a few seconds.
- PTO driveline holder is standard.
- Wheel spindles are in halves for economy and ease of maintenance.
- Center section cushions are at each axle arm to absorb shocks near the wheels.
- Replaceable full length sideband skids give maximum protection and strength to the sideband.
- Wheel hub cap retainers are standard to prevent loss of cap and hub grease.
- Safety lights for highway travel are standard.
- Full Length Sideband Skids
- Patented oil sight gauge in all three cutting gearboxes for quick and easy monitoring of oil levels.
- Each axle arm on the center section has a rubber cushion to absorb the shock loads near the wheels.
PTO
PTO Power, Rated Engine Speed
Minimum Tractor PTO: 50 Hp
Drivetrain
Driveline
Input: Category 4 | Cutting: Category 3
Gearbox
Transfer: 160 HP | Cutting: 65 HP
Suspension
Suspension
Axle: RUBBER PADS (CENTER)
Operational
Operating Speed
Blade Tip Speed: 14,504 Fpm
Hydraulics
Hydraulic Type
Center & Wings Hydraulics: 1 HOSE STANDARD
Chassis
Hitch/Type
CAST SWIVEL CLEVIS
Deck Thickness
Center: 10Ga | Wing: 10Ga
Dimensions
Dimensions
Cutting Capacity: 1 1/2" | Wing Cutting Angles: 22° Down To 45° Up | Side Band: 1/4" X 11 1/2" | Blade Holder: 11GA OVAL | Blades: 1/2" X 3"
Cutting Width
12'
Height
Cutting: 2" – 13"
Transport Width
6′ 8"
Transport Height
5' 8"
Transport Length
13' 7"
Weights
Weight
Approximate: 3,200 lb | Approximate Tongue: 1,100 Lb
Features
Adjustability
Wing: TURNBUCKLES
Warranty
Warranty
10 Year Gearbox Limited | 1 Year Machine Limited