2025 Develon Crawler Excavators DX530LC-7
- Year 2025
- Make Develon
- Model Crawler Excavators
- Engine AFTER TREATMENT: CEGR+DOC+SCR with DEF | NAME: Scania DC13
2025 Develon Crawler Excavators DX530LC-7
Features may include:
Big Productivity and Jobsite Efficiency- Upgrade your earthmoving capabilities with the large DEVELON DX530LC-7 crawler excavator. The conventional tail swing design offers the strength and leverage needed for bigger excavating applications. Lift more weight with each cycle and complete the job faster thanks to a strong workgroup that maximizes lifting capability. Choose from standard arm or super-long reach configurations.
- The standard removable counterweight provides improved machine stability when using heavier attachments — and can be hydraulically lowered to its own trailer for easy transport to the jobsite. With an optimal swing radius, lift height and tilt position, you can lift and place loads and dig with greater productivity. The one-touch power boost momentarily increases hydraulics for even more digging power.
- A DX530LC-7 crawler excavator’s X-Chassis undercarriage offers improved strength and stability. Added material to the mainframe delivers higher performance to prolong machine durability.
- All the major pin points on the excavator boom and arm are steel castings for extra strength in tough working conditions. Heavy-duty wear plates bolt on at the end of the machine arm to maximize machine durability and reliability.
- Recessed drive motors are protected from potential damage, resulting in more uptime.
- The DX530LC-7 delivers increased torque, faster cycle times and efficient fuel consumption.
- Several systems help improve fuel efficiency. The exclusive Smart Power Control (SPC) is implemented through two systems: Variable speed control reduces the engine rpm during low workload to reduce the energy used to perform a task, and the pump torque control efficiently matches hydraulic pump torque and engine response to the task.
- The Mechatronics Design optimizes machine performance while reducing fuel consumption. Auto idle and auto shutdown features also help reduce fuel usage.
- Longer maintenance intervals and convenient service access minimize your time in the shop. For extra accessibility and servicing convenience, all filters — engine oil filter, fuel pre-filters, fuel filters and pilot filter — are located at ground level in the pump compartment.
- You can monitor your DEVELON DX530LC-7 and manage maintenance to reduce operating costs using DEVELON Fleet Management.
- Operators can monitor critical systems in real time using the DEVELON Smart Touch display that’s standard on -7 Series crawler excavators. Plus, they can access historical machine alerts right from the screen in the excavator cab.
Engine
							Engine Manufacturer
							 DC13
						
						
							Engine Power
							RATED FLYWHEEL POWER (GROSS) 394.3 hp @ 1800 rpm (SAE-J1995) | RATED HORSE POWER (NET) 387.6 hp @ 1800 rpm
						
						
							Engine Torque, Maximum
							145601 lbf·ft | SWING PERFORMANCE: MAX SWING SPEED (AT EFFICIENCY) 9 rpm
						
						
							Emissions
							Tier 4
						
						
							Engine
							AFTER TREATMENT: CEGR+DOC+SCR with DEF | NAME: Scania DC13
						
						
							Displacement
							775 in³ | MAIN PUMP: 13.73 in³/rev
						
						Operational
							Ground Pressure
							8.53 psi
						
						
							Operating Conditions
							TRAVEL PERFORMANCE: TRACTION FORCE (HIGHEST VALUE) 100751 lbf | TRAVEL PERFORMANCE: GRADEABILITY 35 ° @ 70 % |  ARM DIGGING FORCE - PRESSURE UP 55303 lbf | BUCKET DIGGING FORCE - PRESSURE UP 60698 lbf | ARM DIGGING FORCE - NORMAL 48800 lbf | ARM DIGGING FORCE - POWER BOOST 51600 lbf | BUCKET DIGGING FORCE - POWER BOOST 67681 lbf
						
						
							Operating Speed
							TRAVEL PERFORMANCE: TRAVELING SPEED - LOW (XXX/) 1.99 mph | TRAVEL PERFORMANCE: TRAVELING SPEED - HIGH (/XXX) 3.48 mph
						
						Hydraulics
							Hydraulic Flow
							103.03 gal/min
						
						
							Maximum Pressure
							 4975 psi
						
						Dimensions
							Track Length
							17' 10"
						
						
							Dimensions
							TRACK LINK: TRACK GAUGE 9' 10" | STANDARD BUCKET SIZE 3.81 yd³ | MAX DIGGING REACH (GROUND) 37' 6"
						
						
							Ground Clearance
							 2' 4"
						
						
							Length
							STANDARD BOOM: 23' 3" | STANDARD ARM: 9' 6" | SHIPPING (WITHOUT ATTACHMENT) 40' 1"
						
						
							Width
							SHOE: 2' 11" | SHIPPING (STANDARD) 11' 11"
						
						
							Height
							SHIPPING - HOSE (WITH ATTACHMENT) 12' 1" | MAX DIGGING: 35' 9"  | MAX LOADING: 25' 4"
						
						
							Overall Height
							10' 11"
						
						
							Depth, Maximum
							DIGGING: 24' 0"
						
						Capacities
							Fuel Capacity
							 165.37 gal
						
						
							Hydraulic Capacity
							 103.03 gal | TANK:  70.01 gal
						
						
							Cooling
							 13.95 gal
						
						
							Oil capacity
							 11.89 gal
						
						Weights
							Weight, In Running Order
							 122117 lb
						
						Features
							Features
							MAIN PUMP: QUANTITY 2
						
						
							Roller Pin Quantity
							UPPER ROLLERS: QUANTITY PER SIDE 3 | LOWER ROLLERS: QUANTITY PER SIDE 9
						
					 of Grand Forks, Devils Lake, Williston, & Bemidji
				of Grand Forks, Devils Lake, Williston, & Bemidji
			 
			